.. _beaglebone-cookbook-kernel: The Kernel ########### The kernel is the heart of the Linux operating system. It's the software that takes the low-level requests, such as reading or writing files, or reading and writing general-purpose input/output (GPIO) pins, and maps them to the hardware. When you install a new version of the OS (:ref:`basics_latest_os`), you get a certain version of the kernel. You usually won't need to mess with the kernel, but sometimes you might want to try something new that requires a different kernel. This chapter shows how to switch kernels. The nice thing is you can have multiple kernels on your system at the same time and select from among them which to boot up. Updating the Kernel ==================== Problem -------- You have an out-of-date kernel and want to make it current. Solution --------- Use the following command to determine which kernel you are running: .. code-block:: bash bone$ uname -a Linux beaglebone 5.10.168-ti-r62 #1bullseye SMP PREEMPT Tue May 23 20:15:00 UTC 2023 armv7l GNU/Linux GNU/Linux The *5.10.168-ti-r62* string is the kernel version. To update to the current kernel, ensure that your Bone is on the Internet (:ref:`networking_usb` or :ref:`networking_wired`) and then run the following commands: .. code-block:: bash bone$ apt-cache pkgnames | grep linux-image | sort | less ... linux-image-5.10.162-ti-r59 linux-image-5.10.162-ti-rt-r56 linux-image-5.10.162-ti-rt-r57 linux-image-5.10.162-ti-rt-r58 linux-image-5.10.162-ti-rt-r59 linux-image-5.10.168-armv7-lpae-x71 linux-image-5.10.168-armv7-rt-x71 linux-image-5.10.168-armv7-x71 linux-image-5.10.168-bone71 linux-image-5.10.168-bone-rt-r71 linux-image-5.10.168-ti-r60 linux-image-5.10.168-ti-r61 linux-image-5.10.168-ti-r62 linux-image-5.10.168-ti-rt-r60 linux-image-5.10.168-ti-rt-r61 linux-image-5.10.168-ti-rt-r62 ... bone$ sudo apt install linux-image-5.10.162-ti-rt-r59 bone$ sudo reboot bone$ uname -a Linux beaglebone 5.10.162-ti-rt-r59 #1 SMP PREEMPT Wed Nov 19 21:11:08 UTC 2014 armv7l GNU/Linux The first command lists the versions of the kernel that are available. The second command installs one. After you have rebooted, the new kernel will be running. If the current kernel is doing its job adequately, you probably don't need to update, but sometimes a new software package requires a more up-to-date kernel. Fortunately, precompiled kernels are available and ready to download. Seeing which kernels are installed ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ You can have multiple kernels install at the same time. T hey are saved in **/boot** .. code-block:: bash bone$ cd /boot bone$ ls config-5.10.168-ti-r62 initrd.img-5.10.168-ti-r63 uboot vmlinuz-5.10.168-ti-r63 config-5.10.168-ti-r63 SOC.sh uEnv.txt dtbs System.map-5.10.168-ti-r62 uEnv.txt.orig initrd.img-5.10.168-ti-r62 System.map-5.10.168-ti-r63 vmlinuz-5.10.168-ti-r62 Here I have two kernel versions installed. .. tabs:: .. group-tab:: Bone On the Bone (Not the Play) the file **uEnv.txt** tells which kernel to use on the next reboot. Here are the first few lines: .. code-block:: bash Line 1 #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 2 3 # uname_r=4.14.108-ti-r137 4 uname_r=4.19.94-ti-r50 5 # uname_r=5.4.52-ti-r17 6 #uuid= Lines 3-5 list the various kernels, and the uncommented one on line 4 is the one that will be used next time. You will have to add your own uname's. Get the names from the files in /boot. Be careful, if you mistype the name your Bone won't boot. .. group-tab:: Play On the Play you can see which version of the kernel will boot next by: .. code-block:: bash play$ cat /boot/firmware/kversion 5.10.168-ti-arm64-r106 If you want to change the version run: .. code-block:: bash bone$ sudo apt install linux-image-5.10.168-ti-arm64-r105 --reinstall .. _kernel_building_modules: Building and Installing Kernel Modules ======================================= Problem -------- You need to use a peripheral for which there currently is no driver, or you need to improve the performance of an interface previously handled in user space. Solution --------- The solution is to run in kernel space by building a kernel module. There are entire `books on writing Linux Device Drivers `_. This recipe assumes that the driver has already been written and shows how to compile and install it. After you've followed the steps for this simple module, you will be able to apply them to any other module. For our example module, add the code in :ref:`kernel_simple_module` to a file called ``hello.c``. .. _kernel_simple_module: .. literalinclude:: ../code/07kernel/hello.c :caption: Simple Kernel Module (hello.c) :language: c :linenos: :download:`hello.c <../code/07kernel/hello.c>` When compiling on the Bone, all you need to do is load the Kernel Headers for the version of the kernel you're running: .. code-block:: bash bone$ sudo apt install linux-headers-`uname -r` .. note:: The quotes around ``uname -r`` are backtick characters. On a United States keyboard, the backtick key is to the left of the 1 key. This took a little more than three minutes on my Bone. The ``uname -r`` part of the command looks up what version of the kernel you are running and loads the headers for it. .. note:: If you don't have a network connection you can get the headers from the running kernel with the following. .. code-block:: sudo modprobe kheaders rm -rf $HOME/headers mkdir -p $HOME/headers tar -xvf /sys/kernel/kheaders.tar.xz -C $HOME/headers > /dev/null cd my-kernel-module make -C $HOME/headers M=$(pwd) modules sudo rmmod kheaders The ``modprobe kheaders`` makes the ``/sys/kernel/kheaders.tar.xz`` appear. Next, add the code in :ref:`kernel_Makefle` to a file called ``Makefile``. .. _kernel_Makefle: .. literalinclude:: ../code/07kernel/Makefile.display :caption: Simple Kernel Module (``Makefile``) :linenos: :download:`Makefile.display <../code/07kernel/Makefile.display>` .. note:: Replace the two instances of ** with a tab character (the key left of the Q key on a United States keyboard). The tab characters are very important to makefiles and must appear as shown. Now, compile the kernel module by using the *make* command: .. code-block:: bash bone$ make make -C /lib/modules/5.10.168-ti-r62/build M=$PWD make[1]: Entering directory '/usr/src/linux-headers-5.10.168-ti-r62' CC [M] /home/debian/docs.beagleboard.io/books/beaglebone-cookbook/code/07kernel/hello.o MODPOST /home/debian/docs.beagleboard.io/books/beaglebone-cookbook/code/07kernel/Module.symvers CC [M] /home/debian/docs.beagleboard.io/books/beaglebone-cookbook/code/07kernel/hello.mod.o LD [M] /home/debian/host/BeagleBoard/docs.beagleboard.io/books/beaglebone-cookbook/code/07kernel/hello.ko make[1]: Leaving directory '/usr/src/linux-headers-5.10.168-ti-r62' bone$ ls Makefile hello.c hello.mod.c hello.o Module.symvers hello.ko hello.mod.o modules.order Notice that several files have been created. ``hello.ko`` is the one you want. Try a couple of commands with it: .. code-block:: bash bone$ modinfo hello.ko filename: /home/debian/host/BeagleBoard/docs.beagleboard.io/books/beaglebone-cookbook/code/07kernel/hello.ko license: GPL description: Hello World Example author: Boris Houndleroy depends: name: hello vermagic: 5.10.168-ti-r62 SMP preempt mod_unload modversions ARMv7 p2v8 bone$ sudo insmod hello.ko bone$ dmesg | tail -4 [ 377.944777] lm75 1-004a: hwmon1: sensor 'tmp101' [ 377.944976] i2c i2c-1: new_device: Instantiated device tmp101 at 0x4a [85819.772666] Loading hello module... [85819.772687] Hello, World! The first command displays information about the module. The *insmod* command inserts the module into the running kernel. If all goes well, nothing is displayed, but the module does print something in the kernel log. The *dmesg* command displays the messages in the log, and the *tail -4* command shows the last four messages. The last two messages are from the module. It worked! .. _kernel_compiling: Compiling the Kernel ===================== Problem -------- You need to download, patch, and compile the kernel from its source code. Solution --------- This is easier than it sounds, thanks to some very powerful scripts. .. warning:: Be sure to run this recipe on your host computer. The Bone has enough computational power to compile a module or two, but compiling the entire kernel takes lots of time and resources. Downloading and Compiling the Kernel ===================================== To download and compile the kernel, follow these steps: .. code-block:: bash host$ git clone https://git.beagleboard.org/RobertCNelson/ti-linux-kernel-dev # <1> host$ cd ti-linux-kernel-dev host$ git checkout ti-linux-5.10.y # <2> host$ ./build_deb.sh # <3> .. note:: If you are using a 64 bit Bone, **git checkout ti-linux-arm64-5.10.y** .. annotations:: <1> The first command clones a repository with the tools to build the kernel for the Bone. <2> When you know which kernel to try, use *git checkout* to check it out. This command checks out branch *ti-linux-5.10.y*. <3> *build_deb.sh* is the master builder. If needed, it will download the cross compilers needed to compile the kernel (`gcc `_ is the current cross compiler). If there is a kernel at ``~/linux-dev``, it will use it; otherwise, it will download a copy to ``ti-linux-kernel-dev/ignore/linux-src``. It will then patch the kernel so that it will run on the Bone. .. note:: *build_deb.sh* may ask you to install additional files. Just run **sudo apt install *files*** to install them. After the kernel is patched, you'll see a screen similar to :ref:`kernel_config_fig`, on which you can configure the kernel. .. _kernel_config_fig: .. figure:: figures/KernelConfig5.10.png :align: center :alt: Kernel configuration menu Kernel configuration menu You can use the arrow keys to navigate. No changes need to be made, so you can just press the right arrow and Enter to start the kernel compiling. The entire process took about 25 minutes on my 8-core host. The ``ti-linux-kernel-dev/KERNEL`` directory contains the source code for the kernel. The ``ti-linux-kernel-dev/deploy`` directory contains the compiled kernel and the files needed to run it. .. _kernel_install: Installing the Kernel on the Bone =================================== The **./build_deb.sh** script creates a single .deb file that contains all the files needed for the new kernel. You find it here: .. code-block:: bash host$ cd ti-linux-kernel-dev/deploy host$ ls -sh total 40M 7.7M linux-headers-5.10.168-ti-r62_1xross_armhf.deb 8.0K linux-upstream_1xross_armhf.buildinfo 33M linux-image-5.10.168-ti-r62_1xross_armhf.deb 4.0K linux-upstream_1xross_armhf.changes 1.1M linux-libc-dev_1xross_armhf.deb The **linux-image-** file is the one we want. It contains over 3000 files. .. code-block:: bash host$ dpkg -c linux-image-5.10.168-ti-r62_1xross_armhf.deb | wc 3251 19506 379250 The **dpkg** command lists all the files in the .deb file and the wc counts all the lines in the output. You can see those files with: .. code-block:: bash host$ dpkg -c linux-image-5.10.168-ti-r62_1xross_armhf.deb | less drwxr-xr-x root/root 0 2023-06-12 12:57 ./ drwxr-xr-x root/root 0 2023-06-12 12:57 ./boot/ -rw-r--r-- root/root 4763113 2023-06-12 12:57 ./boot/System.map-5.10.168-ti-r62 -rw-r--r-- root/root 191331 2023-06-12 12:57 ./boot/config-5.10.168-ti-r62 drwxr-xr-x root/root 0 2023-06-12 12:57 ./boot/dtbs/ drwxr-xr-x root/root 0 2023-06-12 12:57 ./boot/dtbs/5.10.168-ti-r62/ -rwxr-xr-x root/root 90644 2023-06-12 12:57 ./boot/dtbs/5.10.168-ti-r62/am335x-baltos-ir2110.dtb -rwxr-xr-x root/root 91362 2023-06-12 12:57 ./boot/dtbs/5.10.168-ti-r62/am335x-baltos-ir3220.dtb -rwxr-xr-x root/root 91633 2023-06-12 12:57 ./boot/dtbs/5.10.168-ti-r62/am335x-baltos-ir5221.dtb -rwxr-xr-x root/root 88684 2023-06-12 12:57 ./boot/dtbs/5.10.168-ti-r62/am335x-base0033.dtb You can see it's putting things in the **/boot** directory. Note: You can also look into the other two .deb files and see what they install. Move the **linux-image-** file to your Bone. .. code-block:: bash host$ scp linux-image-5.10.168-ti-r62_1xross_armhf.deb bone:. You might have to use debian@192.168.7.2 for bone if you haven't set everything up. Now ssh to the bone. .. code-block:: bash host$ ssh bone bone$ ls -sh bin exercises linux-image-5.10.168-ti-r62_1xross_armhf.deb Now install it. .. code-block:: bash bone$ sudo dpkg --install linux-image-5.10.168-ti-r62_1xross_armhf.deb Wait a while. (Mine took almore 2 minutes.) Once done check /boot. .. code-block:: bash bone$ ls -sh /boot total 40M 160K config-4.19.94-ti-r50 4.0K SOC.sh 4.0K uEnv.txt.orig 180K config-5.10.168-ti-r62 3.5M System.map-4.19.94-ti-r50 9.7M vmlinuz-4.19.94-ti-r50 4.0K dtbs 4.1M System.map-5.10.168-ti-r62 8.6M vmlinuz-5.10.168-ti-r62 6.4M initrd.img-4.19.94-ti-r50 4.0K uboot 6.8M initrd.img-5.10.168-ti-r62 4.0K uEnv.txt You see the new kernel files along with the old files. Check uEnv.txt. .. code-block:: bash bone$ head /boot/uEnv.txt #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 # uname_r=4.19.94-ti-r50 uname_r=5.10.168-ti-r62 I added the commented out uname_r line to make it easy to switch between versions of the kernel. Reboot and test out the new kernel. .. code-block:: bash bone$ sudo reboot .. _kernel_using_cross_compiler: Installin a Cross Compiler ========================== Problem -------- You want to compile on your host computer and run on the Beagle. Solution --------- Run the following: .. tabs:: .. group-tab:: 32-bit .. code-block:: bash host$ sudo apt install gcc-arm-linux-gnueabihf .. group-tab:: 64-bit .. code-block:: bash host$ sudo apt install gcc-aarch64-linux-gnu .. note:: From now on use **arm** if you are using a 32-bit machine and **aarch64** if you are using a 64-bit machine. This installs a cross compiler, but you need to set up a couple of things so that it can be found. At the command prompt, enter **arm-** to see what was installed. .. code-block:: bash host$ arm- arm-linux-gnueabihf-addr2line arm-linux-gnueabihf-gcc-nm arm-linux-gnueabihf-ld.bfd arm-linux-gnueabihf-ar arm-linux-gnueabihf-gcc-nm-11 arm-linux-gnueabihf-ld.gold arm-linux-gnueabihf-as arm-linux-gnueabihf-gcc-ranlib arm-linux-gnueabihf-lto-dump-11 arm-linux-gnueabihf-c++filt arm-linux-gnueabihf-gcc-ranlib-11 arm-linux-gnueabihf-nm arm-linux-gnueabihf-cpp arm-linux-gnueabihf-gcov arm-linux-gnueabihf-objcopy arm-linux-gnueabihf-cpp-11 arm-linux-gnueabihf-gcov-11 arm-linux-gnueabihf-objdump arm-linux-gnueabihf-dwp arm-linux-gnueabihf-gcov-dump arm-linux-gnueabihf-ranlib arm-linux-gnueabihf-elfedit arm-linux-gnueabihf-gcov-dump-11 arm-linux-gnueabihf-readelf arm-linux-gnueabihf-gcc arm-linux-gnueabihf-gcov-tool arm-linux-gnueabihf-size arm-linux-gnueabihf-gcc-11 arm-linux-gnueabihf-gcov-tool-11 arm-linux-gnueabihf-strings arm-linux-gnueabihf-gcc-ar arm-linux-gnueabihf-gprof arm-linux-gnueabihf-strip arm-linux-gnueabihf-gcc-ar-11 arm-linux-gnueabihf-ld What you see are all the cross-development tools. Setting Up Variables ===================== Now, set up a couple of variables to know which compiler you are using: .. code-block:: bash host$ export ARCH=arm host$ export CROSS_COMPILE=arm-linux-gnueabihf- These lines set up the standard environmental variables so that you can determine which cross-development tools to use. Test the cross compiler by adding :ref:`kernel_helloWorld` to a file named _helloWorld.c_. .. _kernel_helloWorld: .. literalinclude:: ../code/07kernel/helloWorld.c :language: c :caption: Simple helloWorld.c to test cross compiling (helloWorld.c) :linenos: :download:`helloWorld.c <../code/07kernel/helloWorld.c>` You can then cross-compile by using the following commands: .. code-block:: bash host$ ${CROSS_COMPILE}gcc helloWorld.c host$ file a.out a.out: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.31, BuildID[sha1]=0x10182364352b9f3cb15d1aa61395aeede11a52ad, not stripped The *file* command shows that *a.out* was compiled for an ARM processor. .. todo Need to install libc. .. _kernel_patches: Applying Patches ================= .. todo Remove patches? Problem -------- You have a patch file that you need to apply to the kernel. Solution --------- :ref:`kernel_hello_patch` shows a patch file that you can use on the kernel. .. _kernel_hello_patch: .. literalinclude:: ../code/07kernel/hello.patch :language: diff :caption: Simple kernel patch file (hello.patch) :linenos: :download:`hello.patch <../code/07kernel/hello.patch>` Here's how to use it: - Install the kernel sources (:ref:`kernel_compiling`). - Change to the kernel directory (+cd ti-linux-kernel-dev/KERNEL+). - Add :ref:`kernel_hello_patch` to a file named ``hello.patch`` in the ``ti-linux-kernel-dev/KERNEL`` directory. - Run the following commands: .. code-block:: bash host$ cd ti-linux-kernel-dev/KERNEL host$ patch -p1 < hello.patch patching file hello/Makefile patching file hello/hello.c The output of the *patch* command apprises you of what it's doing. Look in the ``hello`` directory to see what was created: .. code-block:: bash host$ cd hello host$ ls hello.c Makefile :ref:`kernel_building_modules` shows how to build and install a module, and :ref:`kernel_create_patch` shows how to create your own patch file. .. _kernel_create_patch: Creating Your Own Patch File ============================= Problem -------- You made a few changes to the kernel, and you want to share them with your friends. Solution --------- Create a patch file that contains just the changes you have made. Before making your changes, check out a new branch: .. code-block:: bash host$ cd ti-linux-kernel-dev/KERNEL host$ git status # On branch master nothing to commit (working directory clean) Good, so far no changes have been made. Now, create a new branch: .. code-block:: bash host$ git checkout -b hello1 host$ git status # On branch hello1 nothing to commit (working directory clean) You've created a new branch called ``hello1`` and checked it out. Now, make whatever changes to the kernel you want. I did some work with a simple character driver that we can use as an example: .. code-block:: bash host$ cd ti-linux-kernel-dev/KERNEL/drivers/char/ host$ git status # On branch hello1 # Changes not staged for commit: # (use "git add file..." to update what will be committed) # (use "git checkout -- file..." to discard changes in working directory) # # modified: Kconfig # modified: Makefile # # Untracked files: # (use "git add file..." to include in what will be committed) # # examples/ no changes added to commit (use "git add" and/or "git commit -a") Add the files that were created and commit them: .. code-block:: bash host$ git add Kconfig Makefile examples host$ git status # On branch hello1 # Changes to be committed: # (use "git reset HEAD file..." to unstage) # # modified: Kconfig # modified: Makefile # new file: examples/Makefile # new file: examples/hello1.c # host$ git commit -m "Files for hello1 kernel module" [hello1 99346d5] Files for hello1 kernel module 4 files changed, 33 insertions(+) create mode 100644 drivers/char/examples/Makefile create mode 100644 drivers/char/examples/hello1.c Finally, create the patch file: .. code-block:: bash host$ git format-patch master --stdout > hello1.patch