Features ######### BB-Config v1.x *************** PRU Enable/Disable =================== - Enable/Disable PRU .. image:: images/pru.png :align: center :alt: pru GPIO ===== - Turn On/Off gpio GPIO Menu ---------- .. image:: images/gpio.png :align: center :alt: gpio menu GPIO Setting ------------- .. image:: images/gpio2.png :align: center :alt: gpio setting EMMC and MicroSD Stats ======================= - Storage stats & grow partition .. image:: images/emmc.png :align: center :alt: emmc LEDs ===== - Config board build in LEDs .. image:: images/leds.png :align: center :alt: leds Password ========= - Change users password .. image:: images/password.png :align: center :alt: password SSH ==== - Enable/Disable SSH .. image:: images/ssh.png :align: center :alt: ssh WiFi ===== - Connect to Wi-Fi .. image:: images/wifi.png :align: center :alt: WiFi Internet Sharing and Client Config =================================== .. image:: images/ics.png :align: center :alt: ics - Note: You'll have to configure your host Following is an example script: .. code:: bash echo 1 > /proc/sys/net/ipv4/ip_forward iptables --table nat --append POSTROUTING --out-interface wlp4s0 -j MASQUERADE iptables --append FORWARD --in-interface wlp4s0 -j ACCEPT About ====== .. image:: images/about.png :align: center :alt: about BB-Config v2.x *************** ADC (Graph) ============ - Plot graph for Analogue pin .. image:: images/adc2.png :align: center :alt: adc page .. image:: images/adc.png :align: center :alt: adc graph DAC (PWM) ========== - Generate PWM waveform .. image:: images/pwm.png :align: center :alt: pwm uEnv ===== - Enable/Disable boot configuration .. image:: images/uEnv.png :align: center :alt: uEnv services ========= - Enable/Disable services startup at boot .. image:: images/service.png :align: center :alt: service PINMUX ======= - Display PIN I/O detail - Config PINMUX Hardware Display ----------------- .. image:: images/pinmux.png :align: center :alt: pinmux hardware Pin Table References -------------------- .. image:: images/pinmux2.png :align: center :alt: pinmux table references Pin Config -------------- .. image:: images/pinmux3.png :align: center :alt: pinmux config Overlay (dts) ============== - Enable/Disable Device Tree Overlay in Boot option - Select dtbo file and automate update in uEnv.txt .. image:: images/overlay.png :align: center :alt: overlay WiFi (D-Bus) ============= - Connect to WiFi with wpa_supplicant - Support for Debian 11 .. image:: images/wifi-dbus.png :align: center :alt: WiFi D-Bus